ROTARY CONTINUOUS FILLING FOR EFFICIENT PACKAGING IN ONE LINE
Pinch bag (single pinch)
Bag top is folded 90 degrees; hot-melt glue is melted by hot air; bag top is further folded 90 degrees; and the flap is pressed between belts to be sealed.
Pinch bag with inner PE ply (double pinch) Inner PE ply is preheated and heat-sealed through the outer paper plies, and then hot-melt glue is melted by hot air from the heaters for perfect seal.
Specifications
PBC-S
PBS-S
PBC-3W
PBS-3W
Bag type
3 paper plies
(gusseted)
3 paper plies
(gusseted)
3 paper plies + inner PE
3 paper plies + inner PE
Seal speed (m/min)
6 - 14
6 - 14
6 - 12
6 - 12
Folding depth (mm)
45
45
50
50
Drive (kW)
0.75
0.4
0.75
0.4
Air (NL/min)
400
400
800
800
Heater capacity (kw)
C=3kW
C=3kW
A/B/C=3kW ea. (total 9kW)
A/B/C=3kW ea. (total 9kW)
Sealer dimensions
L (mm)
2,320
1,975
3,424
3,290
W (mm)
1,250
1,515
1,280
1,113
H (mm)
1,752
1,880
1,790
1,800
Sealer gross weight (kg)
280
300
480
500
Measurements (cft)
200
200
220
220
Shipping weight (kg)
550
550
1,250
1,250
●Carrier Chain Carrier chains hold the bag top firmly and traverse throughout the process with the bag held, preventing slippage of sealing position.
●Pre-heater The inner PE is perfectly sealed using the pre-heaters and heater bars of the PBC-3W.
●Hot-air Heater Bag top is folded 90 degrees; hot-melt glue is melted by hot air; and the bag top is further folded 90 degrees.
●Press Belt Press belts press and cool the bag top to firmly close the bag.
●Option (motor driven vertical adjust) The sealer body is vertically moved with a pushbutton switch on the operation side.
●Printer (Option) The automatic ink type printer operates integrally with the pinch sealer. Print appears precisely at the specified position using a sprag clutch and a microswitch. Letter types are easily replaced.